DRY TIP SAW/METAL SAW/HARD METAL SAW/Manufacturing and sales－TANITEC

Milling Cutter /T.C.T. Saw Blade for ERW tube and seamless pipe cutting.

HOME>　Our Products>　TCT Saw Blade for Milling Cutter
	HARD METAL SAW
	■TCT Saw Blade for Milling Cutter■
	It is TCT saw blade that is especially designed for cutting of the welded tube, structural column with flying cut-off machine in the mill factory. The cutting cycle time for flying cut-off machine is limited because the flying machine and mill conveyor speed is required to be synchronized. This is why TCT Saw Blade is designed for great performance with high circumference and feed speed. Our cutting technologies respond to those requirements and realize the stable blade life. Not only for new blade also for scrap blade, we deal with resharpening services and keep on proposing better cutting performance. This blade is used with NAKATA(SHINKO), KUSAKABE, MITSUBISHI, SUMITOMO, and THERMATOOL machine.

Customer Information of Milling Cut Off.
	Material to be cut.		Circumferential Speed V (m／min)	Engaging Feed SZ1(ｍｍ） Orbital Feed SZ2 (mm)	Saw Blade Kerf （mm）	Method
	Range	Thickness Quality Tensile Strength (MPa)	Circumferential Speed V (m／min)	Engaging Feed SZ1(ｍｍ） Orbital Feed SZ2 (mm)	Saw Blade Kerf （mm）	Method
CustomerA	□300～ □450	9～19mm SS400 SM500A	280（t9） 260（t12） 250（t16）	0.10（t9） 0.10（t12） 0.08（t16） 0.18（t9） 0.18（t12） 0.16（t16）	350×48^Z 360×40^Z 4.1（48^Z） 5.4（40^Z）	Four Blades
CustomerB	□200～ □450 φ12”～ φ24”	6.4～19mm ≦500	300（t6.9） 280（t10.3） 260（t16） 240（t19）	0.1 0.18	350×48^Z 350×64^Z 4.3	Four Blades
CustomerC	□100～ □200 φ114.3～ φ267.4	2～12mm ≦550	200～ 400	0.15～0.23 0.13（t＜6） 0.23	350×48^Z 350×64^Z 3.7（48^Z） 4.3（64^Z）	Two Blades
CustomerD	φ114～ φ406	2～19mm ≦750	200～300	0.05～0.1 0.1～0.18	280×60^Z 280×50^Z 280×38^Z 4.0	Four Blades
CustomerE	□250～ □500 φ220～ φ660	3.5～22mm ≦650	200～ 300	0.05～0.1 0.1～0.18	360×48^Z 360×40^Z 360×34^Z 4.0	Four Blades
CustomerF	□40～ □150 φ42.7～ φ219	2.3～6mm	200～ 400	0.05～0.23 0.23	350×64^Z 4.3	Two Blades
CustomerG	□200～ □400 φ114.3～ φ508	～16mm	300～ 400	0.05（Pipe） 0.15～0.23(Column） 0.13～0.19（Pipe） 0.13～0.21（Column）	380×52^Z 380×70^Z 4.5	Two Blades
CustomerH	□150～ □400 φ165.2～ φ406.4	2.3～12.7mm STK、 STKR ≦550	300～ 400		380×52^Z 380×70^Z 4.5	Two Blades
CustomerI	□150～ □400	6～16mm	240	0.18 0.16	380×52^Z 380×70^Z 4.5	Two Blades
CustomerJ	φ190～ φ609.4	3～19mm	180～280	0.06～ 0.1 0.15～ 0.18	340×34^Z 340×48^Z 4.3	Four Blades
CustomerK	φ139.7～ φ426 Seamless Pipe	4～50 Carbon Steel、 Alloy SUS ≦1125	50～220	0.15max	430×54 5.3 6.0	Two Blades
CustomerL	～6inch	2.3～12.7	400～850	0.15max	320×52^Z 320×64^Z 320×72^Z 3.1	Two Blades
CustomerM	～6inch	2.3～9	700～1000	0.08max	355ｘ72^Z 355ｘ90^Z 355ｘ120^Z 2.3	Two Blades

Throw-Away TCT Saw Blade	TCT Saw Blade for Milling Cutter	Standard Hard Metal Saw Blade	Dry Tip Saw
Cermet Tip Saw	Tip Saw for nonferrous metals	HSS Metal Saw	MSS Metal Saw
TiN Metal Saw	Winning Shot	Best Shot	Nice Shot
T.C.T. Saw Blade for iron and steel cutting	T.C.T. Saw Blade for thin material and sheet metal	T.C.T. Saw Blade for Ceramic Fiber Cement board (outer wall material)	Diamond Tipped Saw Blade for Ceramic Fiber Cement board (outer wall material)
Cermet Tip Saw Blade for iron and steel cutting (for Professional Use)	Diamond Blade“STAMINA”	Friction Saw	Shear Blade
Circular Knife

	TANITEC CORPORATION Industrial Park,Kamaidani 21-30, Iwayama,Ujitawaracho,Tsuzukigun, Kyoto,610-0261 Japan Tel :+81 774 88 5001 Fax :+81 774 88 5050 ▲ TOP
	Copyright(C) TANITEC CORPORATION All rights reserved.