Our Products

Cold Saw > Tip Saw / TCT Saw Blade > Standard Hard Metal Saw Blade l TCT Saw Blade for Milling Cutter
 l Throw-Away TCT Saw Blade l Dry Tip Saw l Tip Saw for nonferrous metals
 Standard Hard Metal Saw Blade

Standard Hard Metal Saw Blade


Our TCT Saw Blade (Hard Metal Saw Blade) is the optimum cutting for the billet, seamless pipe, welded pipe, column for construction, rail for railway, parts for Automobile, forging material and so on. We supply it to the major steel manufactures, which is basic industries in Japan.  We provide with the custom saw blades for corresponding to the individual customer requests such as reducing total cutting cost. Our saw blade is used for the automatic cutting machines such as HELLER, KALTENBACH, ENDO, TSUNE, MITSUYA, WAGNER, LINSINGER, and LAZZARI. We provide with TCT Saw Blade in the range ofφ250 to 1600mm diameter. 
 
Diameter (mm) 350 400 710 810 860 960 1000 1120 1160 1250 1400 1600
kerf (mm) 4.0 5.0 6.5 7.0 7.5 8.5 8.5 8.5 8.5 10.0 11.0 11.0
number of tooth 40,44,48,50,54,56,60,64,70,80,90,100,110,120,150,180,200,220,240

 TCT Saw Blade for Milling Cutter

Saw Blade for Milling Cutter


It is TCT saw blade that is especially designed for cutting of the welded tube, structural column with flying cut-off machine in the mill factory. The cutting cycle time for flying cut-off machine is limited because the flying machine and mill conveyor speed is required to be synchronized. This is why TCT Saw Blade is designed for great performance with high circumference and feed speed. Our cutting technologies respond to those requirements and realize the stable blade life. Not only for new blade also for scrap blade, we deal with resharpening services and keep on proposing better cutting performance. This blade is used with NAKATA(SHINKO), KUSAKABE, MITSUBISHI, SUMITOMO, and THERMATOOL machine.





Customer Information of Milling Cut Off
Material to be cut. Circumferential
Speed V
(m/min)
Engaging Feed
SZ1(mm)
Orbital Feed SZ2
(mm)
Saw Blade Kerf
(mm)
Method
Range Thickness Quality
Tensile Strength
(MPa)
CustomerA ⟩300~
⟩450
9~19mm
SS400
SM500A
280(t9)
260(t12)
250(t16)
0.10(t9)
0.10(t12)
0.08(t16)
0.18(t9)
0.18(t12)
0.16(t16)
350×48Z
360×40Z
4.1(48Z)
5.4(40Z)
Four Blades
CustomerB ⟩200~
⟩450
φ12h~
φ24h
6.4~19mm
500
300(t6.9)
280(t10.3)
260(t16)
240(t19)
0.1
0.18
350×48Z
350×64Z
4.3
Four Blades
CustomerC ⟩100~
⟩200
φ114.3~
φ267.4
2~12mm
550
200~ 400 0.15~0.23
0.13(t<6)
0.23
350×48Z
350×64Z
3.7(48Z)
4.3(64Z
Two Blades
CustomerD φ114~
φ406
2~19mm
750
200~300 0.05~0.1
0.1~0.18
280×60Z
280×50Z
280×38Z
4.0
Four Blades
CustomerE ⟩250~
⟩500
φ220~
φ660
3.5~22mm
650
200~ 300 0.05~0.1
0.1~0.18
360×48Z
360×40Z
360×34Z
4.0
Four Blades
CustomerF ⟩40~
⟩150
φ42.7~
φ219
2.3~6mm 200~ 400 0.05~0.23
0.23
350×48Z
360×40Z
4.1(48Z)
5.4(40Z)
Two Blades
CustomerG ⟩200~
⟩400
φ114.3~
φ508
~16mm 300~ 400 0.05(Pipe)
0.15~0.23(Column)
0.13~0.19(Pipe)
0.13~0.21(Column)
380×52Z
380×70Z
4.5
Four Blades
CustomerH ⟩150~
⟩400
φ165.2~
φ406.4
2.3~12.7mm
STK,
STKR
550
300~ 400 380×52Z
380×70Z
4.5
Two Blades
CustomerI ⟩150~
⟩400
6~16mm 240 0.18
0.16
380×52Z
380×70Z
4.5
Two Blades
CustomerJ φ190~
φ609.4
3~19mm 180~280 0.06~
0.1
0.15~
0.18
340×34Z
340×48Z
4.3
Four Blades
CustomerK φ139.7~
φ426
Seamless Pipe
4~50
Carbon Steel,
Alloy
SUS
1125
50~220 0.15ma× 430×54
5.3
6.0
Two Blades
CustomerL ~6inch 2.3~12.7 400~850 0.15ma× 320×52Z
320×64Z
320×72Z
3.1
Two Blades
Customerl ~6inch 2.3~9 700~1000 0.08ma× 355×72Z
355×90Z
355×120Z
2.3
Two Blades

 Throw-Away TCT Saw Blade

Throw-Away TCT Saw Blade


It is a throw-away type of TCT Saw blade applicable to the cutting of solid bar. The tooth hook and clearance angle are precisely designed and developed by our special technologies. Our throw-away TCT saw blade deal with cutting of automobile parts and forged materials which requires severe cutting controls of section, precision, and running cost. This blade saw can be used with Amada, Noritake, Tsune and Nishizima machine.
Throw-away hard metal saw standard size
Cutting machine Diameter
(mm)
Kerf
(mm)
Central
bore (mm)
number
of tooth
pin holes cutting capacity (mm)
Tsune 250 2.0 32 54
60
72
63×11.5×4 φ40~φ50
63×11.5×4 φ30~φ40
63×11.5×4 φ15~φ30
280
(285)
2.0 32 54
60
72
80
63×11.5×4 φ50~φ65
63×11.5×4 φ35~φ50
63×11.5×4 φ20~φ35
63×11.5×4 φ15~φ30
360 2.6 50 60
80
100
80×15×4 φ55~φ100
80×15×4 φ30~φ50
80×15×4 φ20~φ30
Noritake-Amada 280 2.0 40 54
60
72
80
80×11×4 φ50~φ65
80×11×4 φ35~φ50
80×11×4 φ20~φ35
80×11×4 φ15~φ30
360 2.6 40 60
80
100
90×11×4 φ55~φ100
90×11×4 φ30~φ50
90×11×4 φ20~φ30
460 2.7 50 60
80
100
Nishijima 360 2.6 50 60
80
100
80×16×4 φ55~φ100
80×16×4 φ30~φ50
80×16×4 φ20~φ30
KASTO 360 2.6 50 60
80
100
80×14×4 φ55~φ100
80×14×4 φ30~φ50
80×14×4 φ20~φ30
I.T.E.C. 250 2.0 32 54 63×11.5×4 φ40-φ50
60 63×11.5×4 φ30-φ40
72 63×11.5×4 φ15-φ30
285 2.0 32 54 63×11.5×4 φ50-φ65
60 63×11.5×4 φ35-φ50
72 63×11.5×4 φ20-φ35
80 63×11.5×4 φ15-φ30
360 2.6 40 60 63×11.5×4 φ55-φ100
80 63×11.5×4 φ30-φ50
100 63×11.5×4 φ20-φ30
425 2.7 50 40 80×16×4 φ80-φ130
60 80×16×4 φ60-φ80
80 80×16×4 φ40-φ60
100 80×16×4 φ20-φ40
 Dry Tip Saw

Dry Tip Saw


Tungsten Carbide Tipped Saw Blade for metalworking. 
Strong brazing of Carbide Tips and our exclusive tooth form realized high-speed and completely dry cutting. (without any lubrication) 
We have three kinds of blade diameter φ305, 355, 405mm, and it has anti-noise slot and resin filling inside the slot.
Dry Tipped Saw Diameter×Thckness×Bore×Number of tooth (mm) Recommended with machines models
DTS1940 192×1.85×20×40 Jepson 8219
DTS1948 192×1.85×20×48 Jepson 8219
DTS3072 305×2.0×25.4×72 Jepson 9312S
DTS3580 355×2.2×25.4×80 Jepson 9314-T2

 TIP SAW for nonferrous metals

TIP SAW for nonferrous metals


TANITEC Tip Saw Blade is designed for cutting of non-ferrous metal such as aluminum, and copper and also designed as woodworking or resin cutter such as plastics and PVC. The Tip Saw Blade is also manufactured under excellent quality control of every process from hardening to brazing process. TANITEC provides with custom-made saw blades according to customer requests and suggests the best cutting solutions or selection of tooth form, based on our experience.
Standard size of Tipped saw Diameter×Thickness×Bore×Number of tooth×Tooth form
203×2.5×25.4×50×D2 255×2.5×25.4×80×D2 305×2.7×25.4×80×D2
305×2.7×25.4×100×D2 355×3.0×25.4×100×D2 405×3.1×25.4×100×D2
405×3.1×25.4×120×D2 455×3.1×25.4×100×D2 455×3.1×25.4×120×D2
455×3.4×25.4×120×D2